5082019
21
Figure 29
Install Bridge Support to Ladder
STEP 5: NOTE: One end of the bridge support is shorter than the other and the short end must go towards the top of the ladder. As-
semble the bridge support to the ladder starting with one (1) ¼” eye bolt, two (2) washers, and one (1) nut to connect it to the bridge
support U brace. Next attach each end of the bridge support to the holes in the ladder rungs using two (2) ¼’ x 1-1/2” bolts, four (4)
washers and two (2) nuts as shown in Figure 29. Tighten the eyebolt first and then the bolts on each end.
STEP 6: You can now attach the top of the ladder to the ladder adapter on the bottom of the platform using the four (4) ladder connectors
that are already attached to the top of the ladder, two (2) 5/16” x 2” bolts, four (4) washers and two (2) nuts. You can now tighten the bolts.
Figure 30
Install Stabilizer Straps with Cam Buckles
STEP 7: Attach the two (2) stabilizing straps with cam buckles on the ladder rails just above the top step by looping them back thru
themselves and pull tight as shown in Figure 30.
Summary of Contents for OL'MAN OL-11-00
Page 13: ...w Y w...
Page 27: ...5082019 27...
