Milestone MP-SC-5D User Manual Download Page 6

Page: 6 / 34

Compact Scaler Switcher



1 x Power Adapter (DC 12V)



1 x IR remote



1 x Warranty Card



1 x Conformity Certificate



1 x User Manual

Notes

：

Please confirm if the product and the accessories are all included, if not, please

contact with the dealers.

2. Product Appearance of MP-SC-5D

2.1 Front Panel

①

Power indicator

Turn red when power on, turn green when in standby mode.

②

LCD screen

Show the real-time system working status.

③

SOURCE/AUTO



Use as video source selection button, press to select one source, press again to

select next source, switching circularly between HDMI1, HDMI2, HDMI3, VGA1
and VGA2. The LCD screen will show the name of selected source.



Use as switching mode selection button, press and hold on for

7 seconds or

more

to enter in Auto-switching mode, press and hold on for

7 seconds or more

again to enter in Manual-switching mode.

Note:

Setting any VGA port to AV or YPbPr in Manual-switching mode, the system will

not be able to enter in Auto-switching mode. While in Auto-switching mode, setting any
VGA port to AV or YPbPr will force the system to enter in Manual-switching mode with
LCD screen and RS232 control software prompting

“Not support!”.

④

ENTER

Press to confirm selection in menu.

⑤

RESO/AUTO

RESO / AUTO

SOURCE / AUTO

ENTER

VOL -

VOL +

SYSTEM MONITOR

MP-SC-5D

FW UPDATE

MIC +

MIC -

①

②

③ ④

⑤ ⑥ ⑦

⑧

⑨

⑩

Summary of Contents for MP-SC-5D


































Search results

Summary of Contents for MP-SC-5D

Reviews:

Brands by name

Popular brands

Milestone MP-SC-5D, User Manual

Search results

Summary of Contents for MP-SC-5D

Reviews:

Brands by name

Popular brands