72
3.7.5 User
Note:
1. If the NVR firmware version out of the factory is xx.7.0.6 or above, the default user name is
“admin” and the default password is “ms1234”;
2. If the NVR firmware is upgraded to xx.7.0.6 or above from a lower version, the default password
will turn to “ms1234” after a reset, or it will keep the old default password “123456”;
3. If the NVR firmware version is below xx.7.0.6, the default user name is “admin” and the default
password is “123456”.
Add a new user
Click
, then input user information and click
to add a new user.
Note: The user name can only contain letters and number. There are two user levels with different
authority: Operator and Viewer.
Summary of Contents for UI-1009-NA
Page 1: ...Network Video Recorder User Manual V5 02...
Page 12: ...12 4K H 265 PoE NVR Series UI 1009 PA UI 5016 PB UI 7032 PB...
Page 14: ...14...
Page 133: ...133...
