12
3.4 Basic Settings & Interface Settings
Go to
Device > Setting > General Settings
to change the reporting interval, etc.
Parameters
Description
Reporting Interval
Reporting interval of transmitting current sensor values to network
server. Default: 10 min
Temperature Unit
Change the temperature unit displayed on the ToolBox.
Note:
1) The temperature unit in the reporting package is fixed as °C.
2) Please modify the threshold settings if the unit is changed.
Change Password
Change the password for ToolBox App or software to read/write this
device.
For EM300-DI, go to
Device > Settings > Interface Settings
to modify configurations.
Parameters
Description
Interface Type
Change the interface type of GPIO interface. Counter and Digital is
available, counter as default.
Pulse Filter
When the function is enabled, pulse with a rate of more than 250us can
be counted.
Modify Count Value Set the initial counting value.