Mikrotron EoSens CAMMC1186, Reference Manual, Page: 83 / 98

I/O Control
MIKROTRON GmbH 12 ‐ 8
Introduction
There are three features needed to control the line out signals.
LineSelector
This feature selects the physical output line to be configured with the
commands LineSource and LineInverter. Up to now, there are two
output lines that can be selected: either OUT0 or OUT1.
Name Access
Length
[Bytes]
Interface
LineSelector R/W 4 Enumeration
LineSource R/W 4 Enumeration
LineInverter R/W 4 Enumeration
Access
read/write
Type
enumeration
In
OUT0
OUT1
Out
selected output of the Hirose connector
Remark
expert feature