Mikrotron EoSens CAMMC1186, Reference Manual, Page: 18 / 98

Introduction
MIKROTRON GmbH 2 ‐ 5
Power Supply: If you do not use power over CXP, you need an
external power supply unit, e.g.:
– MC1186/MC1187: NTCAM132x (12 V/2.5 A) with 12 pin
Hirose connector (HR10A
‐ 10P ‐ 12S(73)) and 5 m cable
F ‐ mount adapter
System Requirements
In order to use the MC118x camera you need:
• an image processing system, e.g.: PC and operating system
according to the requirements of the frame grabber
• a completely installed frame grabber with device driver and
software
Tip: Read more about frame
grabbers that were tested
with MIKROTRON cameras
in the Application Note
AN0036.
• CoaXPress cable with DIN 1.0/2.3 connector
• if wanted, an external power supply (NTCAM132x or
NTCAM13xx)
Note All cables, connectors and the frame grabber have to be
CoaXPress V1.1 compliant.