Mikrotron EoSens CAMMC1186, Reference Manual, Page: 16 / 98

Introduction
MIKROTRON GmbH 2 ‐ 3
• asynchronous trigger
• trigger IN; strobe OUT
• trigger frequency of 150 (one edge) and
300 kHz in AnyEdge mode
• FPN correction
• CoaXPress link speeds: CXP3, CXP5, and CXP6
• wide power supply range of 12 – 24 V
This high ‐ speed camera comes with an electronically readable man ‐
ual, describing all available GenICAM commands. For more informa ‐
tion see " Configuring the Camera " on page 4 ‐ 3.
Scope of Delivery
The following components are part of delivery. Please, check whether
the delivery is complete, before installing the camera:
Tip: In case you need a firm ‐
w a r e u p d a t e , i n f o r m
M I K R O T R O N v i a m a i l :
info@mikrotron.de
• Camera MC118x as ordered
• F ‐ Mount or C ‐ Mount lens adapter as ordered
• MIKROTRON’s Support CD with
– VCAM2 software
– GenICam XML file
– product documentation
The camera’s firmware can be updated remotely via a special updat ‐
ing software.