Before you start
reasonably be expected to result in personal injury.
NOTE
MIKROTRON customers using or selling these products for use in such
applications do so at their own risk and agree to fully indemnify
MIKROTRON for any damages resulting from such improper use or sale.
1.2
Warranty and non-warranty clause
Warranty is described in §8 of our General Terms and Conditions which can be
downloaded on the MIKROTRON web page
(
www.mikrotron.de/en/terms.html
).
In addition, take the following non-warranty clauses into account.
NOTE
The camera does not contain serviceable parts. Do not open the body of
the camera. If the camera has been opened, the warranty will be void.
NOTE
The camera has to be used with a supply voltage according to the cam-
era’s specification. Connecting a lower or higher supply voltage, AC
voltage, reversal polarity or using wrong pins of the power connector may
damage the camera. Doing so will void warranty.
Our warranty does not protect against accidental damage, loss, or acts of
nature.
INFO
MIKROTRON cannot be held responsible for the loss of data. We recommend a
backup plan.
In case of warranty, make a note of the camera type and its serial number
(S/N).
You find all necessary information on the identification plate of the camera.
Before sending back the camera, ask for a RMA (return merchandise author-
ization) number and RMA form either by:
n
Phone: +49-89-7263-4200 or
n
E-mail:
Send the camera back to your distributor.
If no distributor is available, send it back to MIKROTRON. You find the address
on the last page of this guide.
1.3
Technical support
For technical support, carry out the following steps:
STEP 1:
Visit the website
www.mikrotron.de/en/services/support.html
MIKROTRON GmbH / 3CL / CAMMC301x-UG / 2020
8 - 40
