Mikrotron EoSens 12CXP+, Reference Manual

Page: 35 / 88

Acquisition Control
MIKROTRON GmbH 5 - 3
AcquisitionStart
This feature enables the device to send sampled images to the host.
AcquisitionStop
This feature stops acquiring frames after the acquisition of the cur-
rent frame has been completed.
AcquisitionBurstFrameCount
This feature defines the number of frames to be acquired after each
FrameBurstStart trigger. For more information see "
TriggerSelector "
on page 4.
Tip: If FrameBurstStart is
selected in TriggerSelector,
ExposureMode has to be set
to Timed to make recording
possible.
Access
write
Type
command
In
0x00000001
Out
—
Remark
AcquisitionMode defines how frames will be acquired
Access
write
Type
command
In
x00000001
Out
—
Access
read/write
Type
integer
In
x00000001
Out
number of frames to be acquired