See www.routerboard.com for more information. Contact [email protected] for support questions.
21/08/13
Buttons and Jumpers
�
RouterOS reset jumper hole (access through the plastic door) – resets RouterOS software to defaults.
Must short circuit the metallic sides of the hole (with a screwdriver, for example) and boot the device.
Hold screwdriver in place until RouterOS configuration is cleared.
�
RouterBOOT reset button (access through the plastic door) has two functions:
ü
Hold this button during boot time until LED light starts flashing,
release the button to
reset RouterOS configuration
(same result as with reset hole)
ü
Hold this button during boot time longer, until LED turns off,
and then release it to make the device
look for Netinstall servers.
Operating System Support
Currently tested operating system is MikroTik RouterOS (starting from version v5.20).
Copyright and Warranty Information
Copyright and Trademarks
. Copyright MikroTikls SIA. This manual contains information protected by
copyright law. No part of it may be reproduced or transmitted in any form without prior written
permission from the copyright holder. RouterBOARD, RouterOS, RouterBOOT and MikroTik are
trademarks of MikroTikls SIA. All trademarks and registered trademarks appearing in this manual are the
property of their respective holders.
Hardware
. MikroTikls SIA warrants all RouterBOARD series equipment for the term of fifteen (15)
months from the shipping date to be free of defects in materials and workmanship under normal use
and service, except in case of damage caused by mechanical, electrical or other accidental or intended
damages caused by improper use or due to wind, rain, fire or other acts of nature.
If you have purchased your product from a MikroTik Reseller, please contact the Reseller company
regarding all warranty and repair issues, the following instructions apply
ONLY
if you purchased your
equipment directly from MikroTik Latvia
To return failed unit or units to MikroTikls you must perform the following RMA (Return Material
Authorization) procedure. Follow the instructions below to save time, efforts, avoid costs, and improve
the speed of the RMA process.
Instructions are located on our webpage here:
http://rma.mikrotik.com
Manual. This manual is provided “as is” without a warranty of any kind, expressed or implied, including,
but not limited to, the implied warranty of merchantability and fitness for a particular purpose. The
manufacturer has made every effort to ensure the accuracy of the contents of this manual; however, it
is possible that it may contain technical inaccuracies, typographical or other errors. No liability is
assumed for any inaccuracy found in this publication, nor for direct or indirect, incidental, consequential
or other damages that may result from such an inaccuracy, including, but not limited to, loss of data or
profits. Please report any inaccuracies found to [email protected]
