1.
2.
1.
2.
3.
GPEN11
This device allows powering a PoE capable device over the Ethernet, using the same voltage, as provided with the DC input jack.
Powering
The device accepts power from a direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) 12-57 V DC.
Power output
The device supports PoE out from the Ethernet port located under the cover. You can power Mikrotik devices that support passive powering through
Ethernet.
Mounting
Step 1:
Remove the cover screw using a PH2 screwdriver;
Remove the cover to access mounting points.
Step 2:
Drill holes using drill bid;
Insert dowels if needed;
Attach the unit to the wall, using the wall, and secure with screws.
