Page 24
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Version 5.0 - 10/2018
Initial commissioning
Notice
Recommendation for use of the sintering dishes provided:
h
Use of sintering dish SPEED 120/30 mm at heating rates greater than
25°C/min.
h
Use of sintering dish 120/30 mm at heating rates of 25°C/min and
lower.
Selecting and loading a heating program
1.
Press the
Load
button.
Â
The
LOAD PROGRAM
menu opens.
Â
The sintering oven loads the heating program last used
2.
Press the
S4
button until the required heating program is reached or
enter the desired heating program via the numeric pad.
3.
Press the
S2
button for “YES” to confirm the loading.
Â
The loaded heating program is displayed.
4.
Press the
S1
button for “No” to cancel the loading.
Â
The heating program last loaded is displayed.
Starting/stopping a heating program
Requirements
;
Sintering oven
is filled
;
Heating program is loaded
1.
Press the
Start/Stop
button.
Â
The heating program starts.
Â
The oven door closes automatically.
min
min
S4
S2
S1
Start
Stop
