Miha bodytec m.ove Operating Instructions Manual Download Page 3

Page: 3 / 117

Conscientious handling of the miha bodytec m.ove

Conscientious handling is the prerequisite for successful and safe

use. The trainer must take part in a training session held by the

manufacturer to be able to safely operate the EMS training device,

hereinafter referred to as “device”.

Before starting with the workout, the trainer instructs the athlete/

patient in the basic operating functions and displays on this device

for the workout. The trainer points out consequences caused by

misuse.

Information about this manual

This manual enables safe and efficient handling of the device. This

manual is an integral part of the device and must be kept in the

immediate vicinity of the device and accessible to the trainer at any

time.

The trainer must be able to read and understand this manual. The

trainer must have carefully read and understood this manual before

handling the device. The prerequisite for safe training is compli-

ance with all safety instructions and procedural instructions speci-

fied in this manual. The local regulations for the prevention of acci-

dents and the general safety regulations for the location in which

the device is used also apply.

The illustrations in this manual provide a basic understanding and

may vary from the actual design.

Safety instructions

Safety instructions in this manual are identified by symbols. The

safety instructions are introduced by signal words which express

the extent of the hazard.

DANGER indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION indicates a hazardous situation which, if not

avoided, could result in minor or moderate injury.

NOTICE indicates important, non-safety-related information,

such as property and environmental damage.

Safety instructions in procedural instructions

Safety instructions can refer to specific, individual procedural

instructions. Such safety instructions are embedded in the proce-

dural instructions so that they do not interrupt the reading flow

when performing the activity. The signal words described above

are used.

DANGER

WARNING

CAUTION

NOTICE

Supplemental directives

2021-07-28

miha-bodytec m.ove EMS training device

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands