14
WARNING
Voltage is present on the welding
wire when pressing the welding
hose trigger.
Switch on, press, weld
Welding program setting
• Switch on the welding machine on the main switch
(2)
• Select welding program or material/gas/wire
dimension. (Depending
on the model).
Please read how this should
be selected on your welding
machine in the quick guide.
Select the setting that fits the
required wire and shielding
gas.
• Adjust the welding current and secondary
parameters. Please read your quickguide
• The machine is now ready to weld
Software reading
• Insert the SD card into
the machine’s card
reader as shown in the
drawings.
• Turn on the machine.
• The display flashes
shortly with three lines
• Wait until the set current
is displayed.
• Turn off the machine and
remove the SD card.
• The machine is now
ready for use.
It is necessary to read software inside the new control
unit by means of a SD card, if the control unit has been
exchanged. The software can be downloaded from
http://migatronic.com/login
mm
ADVANCED II SYNERGIC
Connection and start-up