11
Connection and start-up
Warning
Read warning notice and
instruction manual carefully prior
to initial operation and save the
information for later use.
Unpacking the OMEGA
2
C
After unpacking and prior to use, proceed as follows (see
drawing):
Permissible installation
Mains connection
Connect the machine to the correct mains supply. Please
read the type plate (U
1
) on the rear side of the machine.
L1
L2
L3
N
L
N
yellow/green
brown
black
grey
yellow/green
brown
black
grey
3x400V
3x230-400V (boost)
1x230-400V (boost)
0
l
1
2
Important!
In order to avoid destruction of plugs
and cables, good electric contact
is required when connecting earth
cables and welding hoses to the
machine.
Connection of welding hose
Fastening the torch holder
Lifting instructions
Lifting hooks can be used at the OMEGA
2
S and the
OMEGA
2
sack barrow for lifting with a crane (figures 1 and
3).
The OMEGA
2
trolley with four wheels cannot be lifted with
a crane but only manually using the handle (figure 2).
The machine must not be lifted with a mounted gas
cylinder!
Fig. 1
Fig. 2
Fig. 3