Catch tray
Pull out catch tray from front body
until the equipment cools down.
Clean grease and other crumbs.
Reinstall after cleaning.
Warning: if the catch tray is
permitted to fill too high,
should be cleaned!
Per use
10. Troubleshooting
<Table 3>
Problems
Possible causes
Problem
solving
Not lighting
1.Insufficient
gas
pressure in pipe
1.Contact
the
local gas supply
dept.
2.Nozzle occlusion
2.Dredge nozzle
Ignite the
pilot light
but not the
main fire
1.Insufficient
gas
pressure in pipe
1.Contact
the
local gas supply
dept.
2.The main fire nozzle
occlusion
2.Dredge nozzle
3.Gas control valves have
problems
3.Change
gas
control valves
4.The pilot light and the main
fire’s distance is too far
4.Adjust
the
distance of them
5.Flame is too low
5.Adjust
the
height of the pilot
light
Close gas
and heard a
sound of fire
1.Insufficient
gas
pressure in pipe
1.Contact
the
local gas supply
dept.
2.Not match nozzle aperture
with gas resources
2.Adjust nozzle
diameter
3.Flow of connection pipe
is not enough
3.Increase
pipe’s
allowable flow
13
