Mienta GS42709A, Instruction Manual

Page: 11 / 32

11 Instruction Manual
Problem Cause Solution
No steam and
the steam power
indicator light is
turned OFF
Cable is not plugged in the socket Plug the cable in the socket
The steamer isn’t heated up to full
temperature
Always allow steamer to preheat at
least 25 seconds, or until the steam
power indicator light is a steady
green
The thermostat or the thermal
protection is damaged.
Contact an approved
service center
The water pump hasn’t been
prepared
After preheating, always prepare the
water pump by holding the steam
trigger until steam forms to ensure
enough water is in the boiler
Not enough steam or
no steam is coming out
of the steamer and the
steam power indicator
light is turned ON
Troubleshooting
nozzle, to rinse your machine and get rid of any remaining vinegar inside.
Storage
. 1 Unplug the appliance and allow it to cool down for at least
30 minutes.
. 2 Empty the water tank and allow it to dry before reinstalling
it back in place.
Tip: emptying the tank after each use is recommended
because standing water can leave a residue over time.
. 3 Gather the cord into even ovals and then gently cinch with
the strip of hook and loop (Fig.11)
. 4 Keep the appliance in a dry and cool place.
Fig.11
There is not enough water in the
water tank
Follow the instructions under the
“filling the water tank” paragraph and
fill to MAX level marker
The depositions blocked the water
inlet
You need to descale the heating
element (Please refer to “how to
descale your garment steamer?”
paragraph)
Discolored water is
coming through the
holes and staining the
fabric
Residue has built up in the water
tank or on the plate
Empty the water tank after each
use. Only use distilled, filtered, or
purified water (Please refer to “how
to descale your garment steamer?”
paragraph)