6. Starting a program
38
Starting a program
The program can be started when the
Start/Stop
sensor button is flashing on
and off.
Touch the
Start/Stop
sensor button.
The door will lock and the wash
program will start.
The program status will appear in the
display.
11:02
Normal
Status
Time left
h
1:57
Washing
Add laundry
The washing machine will keep you
updated on the program status and the
time remaining for the program to run.
If a delay-start period has been
selected, this will count down in the
display until the program starts.
The drum lighting switches off once the
program has started.
Energy savings
After 10 minutes, the indicators dim.
The
Start/Stop
sensor button will light
up, flashing.
You can reactivate the indicators:
Touch the
Start/Stop
sensor button
(this does not have any effect on a
running program).
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time.
Touch the
Add laundry
sensor button.
The following appears in the display:
Please wait
The program will stop and the door will
unlock.
The following appears in the display:
11:02
Normal
Status
Add laundry
The door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the
Start/Stop
sensor button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C.
- The water inside the drum is above a
certain level.
