Miele WXR 860 Operating Instructions Manual Download

Page: 13 / 116

Operating the washing machine

Main menu

After switching on the washing
machine, the main menu will appear on
the display.

You can access all the important sub-
menus from the main menu.

Touch the



sensor button at any time

to return to the main menu. Values set
previously are not saved.



11:02









Programs

Favourites

MobileStart

Help

Main menu page 1

You can scroll to the second page of
the main menu by swiping your finger
across the display.



11:02









Wash

Assistant

Maintenance

Settings

Help

Main menu page 2

The



symbol next to the time of day is

displayed when the washing machine is
connected to a network.



Programs

You can select the various wash
programs.



Favourites

You can save up to 12 of your own
customized wash programs (see
“Favourites”).



MobileStart

enables you to operate your

washing machine remotely with the
Miele app.

The

Remote Control

setting must be

switched on.

Touch the

MobileStart

sensor button and

follow the instructions in the display.



Wash Assistant

The

Wash Assistant

provides a step-by-

step guide to selecting the optimum
wash program for your laundry (see
“Washing assistant”).



Maintenance

Maintenance options for the TwinDos
system and the

Clean Machine

program

are located in the

Maintenance

(see “Cleaning and care”).



Settings

You can alter the washing machine’s
electronics to suit changing
requirements in the

Settings

menu (see

“Settings”).

Summary of Contents for WXR 860





















































































































Search results

Summary of Contents for WXR 860

Reviews:

Related manuals for WXR 860

Brands by name

Popular brands

Miele WXR 860, Operating Instructions Manual

Search results

Summary of Contents for WXR 860

Reviews:

Related manuals for WXR 860

Brands by name

Popular brands