Miele WXI 860 WCS Operating And Installation Instructions Download

Page: 98 / 112

Settings

Code

The PIN code prevents the washing
machine being used without your
knowledge.

Options

Activate

When the PIN code has been
activated, you have to enter it after
switching the washing machine on.
Otherwise, the washing machine
cannot be operated.
The factory default PIN code is 125.

Change

However, you can set a different,
three-digit PIN code.



Make a note of the new PIN

code. If you forget the code, the
washing machine will need to be
unlocked by Miele Service.

Deactivate

The washing machine is to be
operated again without entering the
PIN code. This only appears if the
PIN code has been activated
previously.

Unit

The temperature and spin speed
values can be displayed in different
ways.

Options

Clear text

(factory default)

The values are displayed as words.

°C + rpm

The temperatures are displayed as
figures in °C.

°F + rpm

The temperatures are displayed as
figures in °F.

Summary of Contents for WXI 860 WCS

















































































































Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands

Miele WXI 860 WCS, Operating And Installation Instructions

Search results

Summary of Contents for WXI 860 WCS

Reviews:

Related manuals for WXI 860 WCS

Brands by name

Popular brands