Miele WXF 660, Operating Instructions Manual

Page: 87 / 104

Installation
*INSTALLATION*
87
Drainage
The suds are drained through a drain
pump with a 1 m delivery head. For the
water to drain freely, the hose must be
installed free of kinks.
If required, the hose can be extended to
a length of up to 5 m. Accessories are
available from your Miele dealer or
Miele Service.
For a delivery head of more than 1 m
(up to a max. of 1.8 m), a replacement
drain pump will need to be installed.
Please contact Miele Service for advice.
For a delivery head of 1.8 m, the hose
can be extended to a length of up to
2.5 m. Accessories are available from
your Miele dealer or Miele Service.
Drainage options:
1. Direct into a sink or basin:
Please note:
– Hook the hose over the edge and
secure!
– If the water is pumped into a sink,
be sure that it can drain away
quickly enough. Otherwise there is
a risk of water overflowing or of
some of the drained water being
sucked back into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a non-return valve).
3. Connected securely to a floor drain.
4. Connected securely to a sink with a
plastic nipple.
Fitting the elbow
Use the elbow supplied to stop the
drain hose from slipping.


 Attach the elbow  to the drain
hose  .


Place the end of the drain hose in a
sink.

Use a strap and the eye

to stop
the elbow from slipping.