Miele WXF 660 Operating Instructions Manual Download Page 39

Page: 39 / 104

7. Program end

Opening the door and
removing the laundry

The door remains locked during the
Anti-crease phase. The display will
change to show:

End/Anti-crease



Press Start button



Unlock the door either by touching
the

Start

Add laundry

sensor button

or by turning the program selector to
the



position.

The door will be unlocked.

Useful tip:

After the Anti-crease phase,

the door will unlock automatically.



Take hold of the door and pull it
open.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.



Check the door seal for any foreign
objects.

Useful tip:

Leave the door slightly open

to allow the drum to dry.



If applicable, remove the used
capsule from the detergent dispenser
drawer.

Useful tip:

Leave the detergent

dispenser drawer slightly open to allow
it to dry.

Summary of Contents for WXF 660









































































































Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands

Miele WXF 660, Operating Instructions Manual

Search results

Summary of Contents for WXF 660

Reviews:

Related manuals for WXF 660

Brands by name

Popular brands