6. Starting the programme
40
Starting a programme
The programme can be started when
the
Start/Stop
sensor is flashing on and
off.
Touch the
Start/Stop
sensor.
The door will lock and the programme
will start.
The programme status will appear in
the display.
11:02
Cottons
Status
Time left
h
2:27
Main wash
Add laundry
The washing machine will keep you
updated on the programme status and
the time remaining for the programme
to run.
If a Delay start time has been selected,
this will count down in the display until
the programme starts.
The drum lighting switches off once the
programme has started.
Energy savings
After 10 minutes the indicators will dim.
The
Start/Stop
sensor flashes slowly.
You can reactivate the indicators:
To do this, touch the
Start/Stop
sensor (this does not have any effect
on a running programme).
Adding laundry during a
programme sequence
(AddLoad)
Laundry can be added or removed
until shortly before the end of the
programme.
Touch the
Add laundry
sensor.
The following appears in the display:
Please wait
The programme will stop and the door
will unlock.
The following appears in the display:
11:02
Cottons
Status
Add laundry
The door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the
Start/Stop
sensor.
The wash programme will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C
- The water inside the drum is above a
certain level
