Miele WWR860 Operating Instructions Manual Download Page 38

Page: 38 / 116

5. Adding detergent

CapDosing

If you selected

CapDosing

when setting

the programme, detergent will be
dispensed via the capsule for this wash
programme.

Only one capsule can be selected per
wash programme.

Three different types of capsule are
available:



= Fabric care (e.g. fabric

softener)



= Additives (e.g. detergent

enhancers)



= Detergent (for the main wash

only)

Depending on the setting selected, the
detergent, additive or fabric care agent
will be dispensed via the capsule.

Each capsule contains the correct
amount for one wash cycle.

Capsules are available to order from
Miele or from the Miele online shop (see
the end of this booklet for contact
details).



Capsules pose a health risk.

The ingredients of capsules can be
hazardous to health if they are
swallowed or come into contact with
skin.
Keep capsules out of the reach of
children.

Inserting a capsule



Open the detergent dispenser drawer.



Open the lid of the





compartment.



Press the capsule in firmly.

Summary of Contents for WWR860





















































































































Search results

Summary of Contents for WWR860

Reviews:

Related manuals for WWR860

Brands by name

Popular brands

Miele WWR860, Operating Instructions Manual

Search results

Summary of Contents for WWR860

Reviews:

Related manuals for WWR860

Brands by name

Popular brands