Miele WWR860 Operating Instructions Manual Download Page 30

Page: 30 / 116

2. Selecting a programme

Switching on the washing
machine



Press the



sensor.

The interior drum lighting will come on.

The drum lighting will go out
automatically after five minutes.

Useful tip:

To switch the lighting on

again, open the pull-down menu from
the overview menu and then touch the



sensor.

The main menu will then appear in the
display.

Selecting a programme



Touch the

Programmes

sensor.



11:02











2:39

3:19

1:59

1:09

Cottons

Delicates

Minimum iron

Programmes

Help

ECO 40-60



Scroll to the right of the display until
the programme you want appears.



Touch the sensor for that programme.

The display will change to show the

Overview

menu.



11:02

40 °C

1600



2:39

Cottons

Overview

Temperature

Spin speed

TwinDos

Extras

not selected

Colour

 Timer

 Save





rpm

There are 3 further ways of selecting a
programme.

1. Favourites

2. Washing assistant

3. MobileStart

Summary of Contents for WWR860





















































































































Search results

Summary of Contents for WWR860

Reviews:

Related manuals for WWR860

Brands by name

Popular brands

Miele WWR860, Operating Instructions Manual

Search results

Summary of Contents for WWR860

Reviews:

Related manuals for WWR860

Brands by name

Popular brands