Before using for the first time
26
6. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the
Cottons
programme
must
be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Turn on the tap and run the “Cottons
90°C” programme without any laundry
Confirm with the
OK
sensor.
The display will switch to the standard
display for the
Cottons
programme.
11:02
90 °C
1600
1:57
Cottons
h
Overview
Temperature
Spin speed
TwinDos
Extras
not selected
Whites
Timer
Save
rpm
Touch the
Start/Stop
sensor.
The calibration programme is started. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Set-up completed
Take hold of the door and pull it
open.
Useful tip:
For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
Switch the washing machine off with
the
sensor.
