manualshive.com logo in svg

Miele WWH 860, Operating Instructions Manual, Page: 99 / 112

Share
Download
Miele WWH 860 Operating Instructions Manual Download Page 99

Settings

99

Degree of soiling

You can specify the level of soiling
that is preset for the 

 sensor.

Options:

-

Light

-

Normal

 (factory setting)

-

Heavy

Buzzer volume

The buzzer sounds to let you know the
programme has finished. The buzzer
can be set to be louder or quieter.

Options

-

Off

-

      

 (quiet)

-

      

 (loud) (factory setting)

Keypad tone

Each touch of a sensor is confirmed
with an audible tone.

Options

-

Off

-

      

 (quiet)

-

      

 (factory setting)

-

      

 (loud)

Welcome tone

The volume for the welcome tone can
be set to one of 7 different settings.

Options

-

Off

-

      

 (quiet)

-

      

 (factory setting)

-

      

 (loud)

Consumption

In this setting you can check the
saved energy and water consumption
values.

Options

-

Previous programme

Shows the consumption for the last
wash programme carried out.

-

Total consumption

Shows the total of the energy and the
total of the water used by the
previous programmes.

-

Reset function

The energy consumption and water
consumption totals are reset to zero.

Summary of Contents for WWH 860

















































































































Reviews:

No comments