Settings
87
Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the Options) selected for
a program after the program has
started.
When the program is chosen again, the
saved settings will appear in the
display.
The memory function is switched off in
the factory setting.
Water intake
You can program 3 options for the
water inlet. The water inlet is
controlled by the two inlet hoses.
Options
–
Cold water
The washing machine will be
operated with cold water only.
–
Hot water
(factory setting)
Hot water is used in the main wash to
save energy.
You can heat up your water with
cheaper, primary energy sources, e.g.
gas, solar power, oil. The temperature
must be below 60 °C.
For technical reasons, the
washing machine
must
always be
connected to cold water.
Long p-wash Normal
If you require a longer pre-wash, you
can extend the standard pre-wash
time of 25 minutes.
Options
–
No increase
(factory setting)
25-minute pre-wash.
–
+ 6 min
31-minute pre-wash.
–
+ 9 min
34-minute pre-wash.
–
+ 12 min
37-minute pre-wash.
Soak duration
You can set a duration for the soak
process of between 30 minutes and
6 hours.
A duration can be selected in 30-minute
increments. When the
Soak
extra option
is selected, the laundry will be soaked
for the duration selected.
The machine is delivered with a
duration of
0:30 hours
.
Summary of Contents for WWH 660
Page 94: ......
