Spinning
34
Final spin speed in wash pro-
grammes
When a programme is selected, the
sensor control for the optimum spin
speed for that programme will be
brightly lit up in the control field.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme
rpm
ECO 40-60
1400
Cottons
1400
Minimum iron
1200
Delicates
900
Woollens
1200
Express 20
1200
Dark garments/Denim
1200
Shirts
900
Proofing
1200
Drain/Spin
1400
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of less
than 700 rpm is selected for the
Cot-
tons
programme, an additional rinse is
introduced.
Selecting Rinse hold (final spin)
Touch the
sensor control (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps to prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin
cycle
The sensor control for the optimum spin
speed lights up on the control field. You
can change the spin speed.
Touch the
Start
/
Add laundry
sensor
control.
Ending a programme without a spin
cycle
Reduce the spin speed to 0.
Touch the
Start
/
Add laundry
sensor
control.
To omit rinse and interim spin
and the final spin
Touch the
sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
