Miele WWD 660 Operating Instructions Manual Download Page 28

Page: 28 / 96

5. Add detergent

Detergent dispenser drawer

Any detergent suitable for automatic
front loading washing machines can be
used. Please observe the instructions
for use and dosage on the detergent
packaging.

Ensure that TwinDos dispensing is
deactivated.

Adding detergent



Pull out the detergent drawer and add
detergent to the compartments.



Detergent for the pre-wash



Detergent for the main wash




Fabric softener, liquid starch or
capsules

Adding fabric conditioner



Add fabric conditioner or liquid starch
to the



compartment.

Do not ex-

ceed the maximum level mark.

It will be automatically dispensed in the
final rinse. At the end of the programme
a small amount of water remains in the



compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube, regularly.

Summary of Contents for WWD 660

































































































Search results

Summary of Contents for WWD 660

Reviews:

Related manuals for WWD 660

Brands by name

Popular brands

Miele WWD 660, Operating Instructions Manual

Search results

Summary of Contents for WWD 660

Reviews:

Related manuals for WWD 660

Brands by name

Popular brands