Before using for the first time
20
4. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the
Cottons
programme
must
be run without laundry and
without detergent.
Open the stopcock.
Turn the programme selector to the
Cottons
position.
The washing machine is now switched
on and the temperature
40
and spin
speed
1400
light up.
Touch the Start/Add laundry sensor
control.
The wash programme will start.
After 10 minutes, the indicators dim.
Opening the door at the end of the
programme
The door remains locked during the
anti-crease phase. The control field
lights up for the first 10 minutes. The
control field then goes out and
the
Start
/
Add laundry
sensor control
flashes.
Turn the programme selector to the
position.
appears on the timer display and
the
indicator light goes out.
The door unlocks.
Tip:
After the anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field will be completely
dark.
Take hold of the door and pull it
open.
Tip:
Leave the door slightly open to al-
low the drum to dry.
Initial commissioning is now complete.
