Miele WTH 120 WPM Operating Instructions Manual Download Page 54

Page: 54 / 124

DRYING

2. Select a programme

Switch the washer-dryer on



Press the



button.

The interior drum lighting will come on.

The drum lighting will go out automat-
ically after five minutes.

Select a programme

- with the programme selector dial



Turn the programme selector to the
required programme.

The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.

- with the programme selector dial
set to the “Further programmes” po-
sition



Turn the programme selector to

Fur-

ther programmes

The following will appear in the display:

Denim





Touch the





sensor until the

programme you want appears in the
display.



Confirm the programme with the

sensor.

The maximum load for the programme
selected will appear in the display. This
will then be replaced by the standard
display.

Summary of Contents for WTH 120 WPM





























































































































Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands

Miele WTH 120 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTH 120 WPM

Reviews:

Related manuals for WTH 120 WPM

Brands by name

Popular brands