Programmable functions
87
Keypad tone
The tone that sounds when a sensor
control is pressed can be switched on
or off.
Options
= Off
= On
(factory default)
PIN code
The PIN code prevents your washer-
dryer being used without your know-
ledge.
When the PIN code has been activated,
you have to enter the code after switch-
ing the washer-dryer on. Otherwise the
washer-dryer cannot be operated.
Options
= Off
(factory default)
= On
If the
option has been selected, you
will have to enter the PIN code before
you can operate the washer-dryer.
Using the washer-dryer when the PIN
code is activated
The code is
125
and cannot be altered.
Switch the washer-dryer on.
appears on the time display and
the
and
sensor controls light up.
Touch the
sensor control.
appears on the time display.
Confirm the number with the
Start/
Add laundry
sensor control.
The first number has been saved.
Enter the second and third numbers
using the
and
sensor controls
and confirm the numbers with the
Start/Add laundry
sensor control.
The lock function is deactivated.
Control field switch-off be-
haviour
To save energy the time display and
sensor controls will go out after
10 minutes, and only the
Start/Stop
sensor control will flash slowly.
Options
= Off
The time display and sensor
controls will remain lit up while
the washer-dryer is switched
on.
= On
(factory default)
The time display and sensor
controls will switch off
10 minutes after the pro-
gramme has started.
However, the time display and
sensor controls will remain lit
up for 10 minutes after a delay
start period has elapsed, after
the end of a programme or at
the end of the anti-crease
phase.
