Language selection*
(if necessary)
^
Turn the unit on at the wall switch.
^
Turn the key to position
B
"Operation".
Press the "OFF"
Z
button to turn off the
machine.
^
Press the
X
"Start" button and the
Y
"ON"
button at the same time and hold pressed
in, until the display shows the following:
SETTING LOCAL LANGUAGE
DEUTSCH
>ENGLISH<
After selection press Start button.
^
Select the desired language with the
1 2
"Cursor" buttons.
The display content being shown is immedi-
ately converted into the selected language.
^
Confirm the selected language by press-
ing the
X
"Start" button.
Setting current time and date*
^
Turn off the machine with the
Z
"Power off"
button.
^
Turn the key to position
B
"Operation".
^
Press the
W
"Delay start" button and the
Y
"ON " button at the same time and hold
pressed in, until the display shows the fol-
lowing:
SETTING TIME AND DATE
Time of the day
>14< :
30 hrs
Date
23.
03.
1995
After selection press Start.
^
Use the
2
"Cursor" to position the cursor
on the input field to be changed and set
the change with the
3 4
"Minus or Plus"
buttons.
^
Position the
2
"Cursor" on the hours and
set the hours.
^
Position the cursor on the minutes and set
the minutes.
^
Position the cursor on Day and set the day.
^
Position the cursor on Month and set the
month.
^
Position the cursor on Year and set the
year.
^
Store the changes by pressing the
X
"Start" button.
*If pauses between programming steps
lasts longer than 25 seconds, the display
will return to the basic stage and the
changes will be lost.
Operation
12
