Miele WMV 960 WPS Operating Instructions Manual Download Page 55

Page: 55 / 120

Changing the programme sequence

Cancelling a programme

You can cancel a programme at any
time after it has started:



Touch the

Start/Stop

sensor.



Select

Cancel programme

The suds will be pumped away. The
programme is now cancelled. The door
lock will be released.



Pull open the door.



Remove the laundry.

If you want to select a different pro-
gramme



Close the door.



Select the programme you want.



Add detergent to the detergent dis-
penser drawer, if necessary.



Touch the

Start/Stop

sensor.

The new programme will begin.

Interrupting a programme



Switch the washing machine off with
the



button.



Switch the washing machine back on
with the



button to continue with

the same programme.

Changing a programme

After the start of a programme it is no
longer possible to select a different pro-
gramme.

Temperature

With the exception of the

Cottons

pro-

gramme, it is possible to select a differ-
ent temperature up to five minutes after
the programme has started.



Touch the

Change

sensor.



Touch the

Temperature

sensor.



Set the temperature you want with

–

and

and confirm with

Spin speed

It is possible to change the spin speed
up until the final spin begins.



Touch the

Change

sensor.



Touch the

Spin speed

sensor.



Set the spin speed you want with

–

and

and confirm with

Options

It is possible to select or deselect cer-
tain options up to five minutes after the
programme has started.

It is not possible to make any changes
to the programme or to cancel it if the
safety lock has been activated.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands