Miele WMV 960 WPS Operating Instructions Manual Download Page 110

Page: 110 / 120

Settings

110

Display brightness

There are seven different display
brightness settings.

The brightness changes as soon as you
select a different setting.

Display switch-off setting

To save energy, the display will go out
and the

Start/Stop

button will flash

slowly.

Options

– On

The display will go out after 10
minutes.

– On (not in current programme) (Fact-

ory default setting)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the pro-
gramme.

– Off

The display will remain on.

Machine switch-off setting

The washing machine will switch off
automatically after the end of the pro-
gramme/anti-crease phase or after be-
ing switched on if no further selection
is made.

Options

– 15 minutes (Factory default setting)

The washing machine will switch it-
self off after 15 minutes.

– 20 minutes

The washing machine will switch it-
self off after 20 minutes.

– 30 minutes

The washing machine will switch it-
self off after 30 minutes.

Display maximum load

After a programme is selected the
maximum load appears in the display
for a short time. You can switch this
off.

Factory default setting:

Display max-

imum load

is switched on.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands