Changing the programme sequence
57
Cancelling a programme
You can cancel a programme at any
time after it has started:
Press the
Start/Stop
button.
The following will appear in the display:
Selection
Cancel programme
Add laundry
Save as a Favourite programme
Touch the
OK
sensor.
The suds will be pumped away. The fol-
lowing will appear in the display:
Cottons
10:30
1600 rpm
Programme cancelled
Pull open the door.
Remove the laundry.
If you want to select a different pro-
gramme
Close the door.
Select the programme you want.
Add detergent to the detergent dis-
penser drawer, if necessary.
Press the
Start/Stop
button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the
button.
Switch the washing machine back on
with the
button to continue with
the same programme.
Changing a programme
After the start of a programme it is no
longer possible to select a different pro-
gramme.
Temperature
With the exception of the
Cottons
pro-
gramme, it is possible to select a differ-
ent temperature up to 5 minutes after
the programme has started.
Press the
Temperature
button.
Use the
,
and
OK
sensors to
change the temperature.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
Press the
Spin speed
button.
Use the
,
and
OK
sensors to
change the spin speed.
Options
It is possible to select or deselect the
Short
and
Water plus
options up to 5
minutes after the programme has star-
ted.
Tip:
It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.
