background image

Options

48

Options are selected and deselected via
the relevant buttons and the display.

Press the button for the option you
want.

The relevant button will light up.

Not all options are suitable for use with
every programme.

You can only select options which are
compatible with the programme being
used.

ProgrammeManager

The ProgrammeManager option can be
used to customise the washing pro-
grammes to suit your requirements.

Intensive

For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is in-
creased through more intense mechan-
ical action and the application of more
heat energy.

ECO

This option reduces energy consump-
tion whilst maintaining cleaning effi-
ciency. This is achieved by increasing
the wash duration and at the same time
reducing the wash temperature selec-
ted.

Extra gentle

This option decreases mechanical ac-
tion in order to reduce creasing.

Extra quiet

This option reduces noise levels during
the programme. Use this if you want to
wash during quiet periods (for instance
when children are sleeping). The ma-
chine will activate the "Rinse hold" op-
tion and not spin. The programme dura-
tion is longer.

AllergoWash

This option should be used where high
standards of hygiene are required. More
energy is used to lengthen temperature
holding times and more water is used to
increase rinsing efficiency.

Not all ProgrammeManager options
are suitable for use with every pro-
gramme. Please refer to the "Wash
programme chart - ProgrammeMan-
ager" for a list of suitable pro-
grammes.

Summary of Contents for WKR571

















































































































Reviews: