6. End of programme - unload the drum
27
End of programme
The time display shows
0:00
. The
symbol will remain lit up in the control
panel. The door is locked in the anti-
crease phase.
Touch the
Start/Stop
sensor.
The door will unlock and the symbol
appears in the control panel.
Pull open the door.
Remove the laundry.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the
Start/Stop
sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum!
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip:
Leave the door slightly open to
allow the drum to dry.
Turn the programme selector to the
position. This switches the washing
machine off.
If applicable, remove the used
capsule from the detergent
dispensing drawer.
Tip:
Leave the detergent dispenser
drawer slightly open to allow it to dry.