Miele WCI 860 Operating Instructions Manual Download

Page: 27 / 112

2. Select a programme

Switching on the washing ma-
chine



Turn the programme selector to a
programme.

Programme selection

There are three possible ways to select
a programme:

1. Select standard programmes with
the programme selector dial



Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The standard display will
then appear.

2. Selecting additional programmes
by setting the programme selector to
“Further programmes/



” and using

the display:



Turn the programme selector to the

Further programmes



position.

The following appears in the display:

Outerwear











Touch the



sensor controls until

the programme you want appears in
the display.



Confirm the programme with the

sensor control.

Preset programme parameters will be
displayed, depending on the pro-
gramme selected.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands