Miele WCI 860 Operating Instructions Manual Download

Page: 19 / 112

Before using for the first time

Switching on the washing ma-
chine



Turn the programme selector to the

Cottons

programme.

The welcome tone will sound and the
welcome screen will light up.

The display will guide you through the

5 steps

of the initial commissioning

process.

1. Set the language

You will be prompted to set the display
language. It is possible to change the
language at any time by setting the pro-
gramme selector to

Further pro-

grammes



in the

Settings 

sub-menu.



english (GB)











Touch the



sensor controls until

the language you want appears in the
display.



Confirm your choice of language by
touching the

sensor control.

2. Setting up Miele@home

The following message appears in the
display:



Miele@home



Confirm with

The following message appears in the
display:

Set up now



To set up Miele@home now: touch
the

sensor control.



To postpone setup until later: touch
the



sensor control until the follow-

ing appears in the display:

Set up later

and press

to confirm.

The following selection options appear
in the display:

Connect via WPS

Connect via App



Select the required connection type.

You will then be guided by the display
and the Miele@mobile app.

Summary of Contents for WCI 860

















































































































Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands

Miele WCI 860, Operating Instructions Manual

Search results

Summary of Contents for WCI 860

Reviews:

Related manuals for WCI 860

Brands by name

Popular brands