manualshive.com logo in svg

Miele WCI 320, Operating Instructions Manual

Share
Download
Miele WCI 320 Operating Instructions Manual Download Page 74

Installation

74

Installing under a continuous
worktop

Risk of electric shock due to

exposed cables
There is a risk of coming into contact
with live parts while the lid is
removed.
Building under kits* must only be
installed/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.

– A special 

building under kit

* is

required. The cover plate supplied
with the building under kit is used to
replace the machine lid. It is
necessary to fit the coverplate for
electrical safety reasons.

– Connections for electricity, water and

drainage should be installed in such a
way that they remain accessible
when the machine is in its final
position.

Fitting instructions are supplied with the
building-under kit.

Washer-dryer stack

The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate “WTV”
stacking kit* to match your dryer is
required.

All parts marked* are available from
your Dealer or Miele.

Please note:

a

= at least 2 cm

b

= WTV without drawer: 172 cm

WTV with drawer: 181 cm

c

= 64 cm

Summary of Contents for WCI 320





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands