Miele W 3370 Operating Instructions Manual Download

Page: 13 / 72

Control panel

Display

See the following page for more
information.

Start button

– For delaying the start of a

programme

– Starts the wash programme

Extra option buttons

Extra options can be added to the
basic programme.
Use the top button to select either
the

Short

Pre-wash

, or

Soak

option.

Use the lower button to select the

Water plus

option.

Indicator light on = option selected
Indicator light off = option not
selected

Indicator lights for spin speed,
Rinse hold or Without spin.

Spin button

For selecting the final spin speed,

Rinse hold

Without spin

Programme selector

For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.

Programme sequence indicator
lights

Show which section of the wash
programme has been reached.

Maintenance/check lights

Button

For switching the washing machine
on and off.
To save energy, the washing
machine will switch itself off
automatically 15 minutes after the
end of the programme/anti-crease
phase or after being switched on, if
no other selection is made.

Door button

Opens the machine door.

Operating the washing machine

Summary of Contents for W 3370









































































Search results

Summary of Contents for W 3370

Reviews:

Related manuals for W 3370

Brands by name

Popular brands

Miele W 3370, Operating Instructions Manual

Search results

Summary of Contents for W 3370

Reviews:

Related manuals for W 3370

Brands by name

Popular brands