Miele W 1611, Operating Instructions Manual

Page: 25 / 64

This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
The display shows the stage the
programme has reached.
Special features in the programme
sequences:
Anti-crease:
For instructions how to activate
'anti-crease', please refer to
"programmable functions" in the last
section of these instructions.
(user-selectable Programmable
Feature. Default as delivered is OFF)
At the end of every programme, with
the exception of the
Woollens
programme, the drum continues to turn
at intervals for up to 30 minutes to help
prevent creasing. The door can be
opened and laundry removed at any
time during the anti-crease phase.
1)
A third rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– No
u
has been selected
2)
A third rinse is carried out if:
No
u
has been selected
Programme sequence
25