Timer
43
SmartStart
The SmartStart function lets you
define a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g., from
your energy supplier, that indicates
that the electricity tariff is particularly
economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1 minute and 24 hours. During this
period, the dryer waits for the signal
from the energy supplier. If no signal is
sent during the defined period, the
dryer starts the drying program.
Setting the timeframe
If you have activated the SmartGrid
function in Settings, SmartStart or
SmartFinish will appear in the display
instead of Start at or Finish at when
you touch the
Timer sensor (see
“Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for delay
start.
Now set the time you want and
confirm with the
OK
sensor button.
Touch the Start/Stop sensor button to
start the drying program with
SmartStart.
The selected program will start
automatically, as soon as the energy
supplier has sent the signal, or the
latest calculated start time has been
reached.
The procedure for changing or
deleting the SmartStart function is the
same as described for the Delay start
function.
