Miele TWI 180 WP Operating Instructions Manual Download Page 85

Page: 85 / 96

Settings

Calling up settings

You can alter the tumble dryer's
electronics to suit changing
requirements with the settings.
The settings can be altered at any
time.



Turn the program selector to

programs/









Table Linens/Drapes



Touch the



sensor button once.

The following appears in the display:







Settings 



Confirm with the

sensor button.







Language 

You are now in the

Settings

submenu.

Selecting settings



Touch the





sensor button until

the setting you want appears in the
display.

– The



sensor button scrolls down

the list.

– The



sensor button scrolls up the

list.



Touch the

sensor button to select

the setting displayed.

Changing a setting



Touching the





sensor button

will call up the different options for
the setting.

For example, you can

– select a value (if the option is marked

with



, it is active),

– change a bar chart,

– change numbers.



When the option you want appears in
the display, touch the

sensor

button to activate it.

Closing the Settings menu



Turn the program selector.

Summary of Contents for TWI 180 WP

































































































Search results

Summary of Contents for TWI 180 WP

Reviews:

Related manuals for TWI 180 WP

Brands by name

Popular brands

Miele TWI 180 WP, Operating Instructions Manual

Search results

Summary of Contents for TWI 180 WP

Reviews:

Related manuals for TWI 180 WP

Brands by name

Popular brands