Initial commissioning
Operation
Drying
Changing the program
Fragrance capsule
Tip: Using a fragrance capsule will add a
pleasant fragrance to your laundry.
寿
Before using a fragrance capsule,
please read "IMPORTANT SAFETY
INSTRUCTIONS – Using a fragrance
capsule (optional accessory)" and
"Fragrance capsule" in the operating
instructions.
Inserting a fragrance capsule
1.
2.
3.
4.
Markers
and
must line up with
one another.
5.
6.
ĺ
Turn the outer ring clockwise a little.
Before drying
ĺ
Turn the outer
ring clockwise.
The further you open the capsule, the
more intense the fragrance.
After drying
To avoid the fragrance escaping need-
lessly:
ĺ
Turn the outer
ring counter-
clockwise until
marker
is in
position
.
If you want to dry laundry occasionally
without adding fragrance: Remove the
fragrance capsule and store it in its orig-
inal packaging until you want to use it
again. See the following section.
Before cleaning the lint filters
ĺ
Remove the
fragrance
capsule
(reverse points
3 and 4) and
store it in its
original packa-
ging.
寿
Never lay the fragrance capsule
down on any surface as the fragrance
will spill out.
M.-Nr
. 10 671 340/00
TWF 160 WP
en – US
Energy saving tips
To avoid unnecessarily long drying times
and high consumption of energy:
–
Make sure your laundry is spun at the
maximum spin speed before drying.
–
Load according to the optimum
amount of laundry recommended for
the program being used. This will mean
that the energy consumption for the
amount of laundry is at its most eco-
nomical.
–
Clean the lint filters after every drying
cycle.
–
Make sure the room temperature is not
too high.
If there are other heat producing appli-
ances in the room in which the tumble
dryer is located, make sure the room
is well-ventilated and switch the other
appliances off, if possible.
1. Notes on correct laundry care
寿
Remove foreign objects like detergent dispensing
devices from the laundry.
They can melt and damage the dryer and the laundry.
ĺ
Sort the laundry according to the type of fiber and
weave, size, garment care label symbol, and the drying
level required.
ĺ
Untangle the laundry.
ĺ
Check seams and stitching to ensure that padding and
linings are intact.
ĺ
Fasten duvet covers and pillow cases to prevent small
items from being rolled up inside them.
ĺ
Fasten hooks and eyes.
ĺ
Tie together textile belts and apron ties.
ĺ
Sew in or remove underwiring from bras.
1
Condensed water container
– empty after every drying program
2
Door
3
Control panel
4
Access panel for the heat exchanger and plinth filter
– do not open during drying
5
Cold air intake grille
– do not obstruct with a laundry basket or other objects
OPERA
TION
DR
YING
CHANGING THE PROGRAM SEQUENCE
1
Control field
The control field consists of a display and
various sensor buttons.
2
Display
Different values are displayed and/or
selected on the display:
3
Sensor buttons
The values in the display can be changed
with the
sensor buttons.
4
OK sensor button
Confirm the selected values with the OK
sensor button.
5
Perfect Dry indicator
With programs with a selectable drying
level, the Perfect Dry system calculates
the residual moisture present in the laun-
dry to ensure a precise drying result.
The display flashes at the beginning of
the program and lights up towards the
end of the program.
6
Optical interface
for service technicians.
7
Sensor buttons for extras
You can supplement the drying program
with extra options.
8
Sensor button
You can use the
sensor button to call
up an energy consumption forecast for
the selected drying program.
9
Sensor button
The sensor button
starts the delay
start function.
10
Start/Stop sensor button
Touching the Start/Stop sensor button
starts the selected program or cancels a
program that has already been started.
11
Program selector
For selecting programs and for switch-
ing off the machine. The tumble dryer is
switched on when you select a program,
and switched off by turning the program
selector to the
position.
Operating the sensor buttons
The sensor buttons react to fingertip con-
tact. Selection is possible as long as the
respective sensor button is illuminated.
If a sensor button is brightly lit,
this means: currently selected
If a sensor button is dimly lit,
this means: selection possible
3. Loading the tumble dryer
ĺ
Open the door.
ĺ
Unfold the laundry and load
loosely into the drum.
寿
Do not overload the drum.
Overloading can cause unnec-
essary wear and tear to the laun-
dry, give a disappointing drying
result and cause more creasing.
寿
If you are not using a fra-
grance capsule: The tab must be
pushed down completely (see
arrow).
寿
When closing the door, make
sure that laundry does not get
trapped in the door opening.
ĺ
Shut the door with a gentle
swing.
Switching on the tumble dryer
ĺ
Turn the program selector to a program.
The welcome tone will sound and the wel-
come screen will light up. The display will
now guide you through the initial commis-
sioning, which is divided into several steps.
For further information please refer to the
separate operating instructions supplied.
2. Selecting a program
ĺ
Turn the program selector to a program.
The interior drum lighting will come on.
Program selection
There are three possible ways to select a program:
1. Selecting the standard programs with the program
selector dial
ĺ
Turn the program selector to the required program.
The selected program will be shown in the display. This
will then be replaced by the standard display.
2. Selecting more programs by setting the program
selector to the "More programs/
" position and the
display.
ĺ
Turn the program selector to the
More programs/
position.
The following will appear in the display: Time Dry
ĺ
Touch the
sensor buttons until the program you
want appears in the display.
ĺ
Confirm the program with the
OK
sensor button.
3. Selecting the programs via the MobileControl
program selector position and the Miele@mobile app
ĺ
Turn the program selector to the
MobileControl
position.
ĺ
Follow the instructions in the display.
ĺ
Touch the "Start/Stop" sensor button.
The dryer can now be operated via a mobile device together
with the Miele@mobile app.
EcoFeedback
You can use the
sensor button to call
up an energy consumption forecast for the
selected drying program.
ĺ
Touch the
sensor button.
The estimated energy consumption levels
will be displayed as a bar chart.
Delay start/SmartStart
Delay start
With the delay start function, you can delay
the start of the program. The start of the
program can be delayed from 15 minutes
up to a maximum of 24 hours.
SmartStart
With the SmartStart function you can define
a time period during which your dryer will
be started automatically by a signal, for
instance to make use of cheaper electric-
ity rates.
5. Starting a program
ĺ
Touch the flashing
Start/Stop
sensor but-
ton.
The Start/Stop sensor button will light up
and
Drying
will appear in the display.
6. Program end – removing the
laundry
The program is finished when
End/
Anti-crease
or
End
appears. The
Start/Stop
button light goes out.
–
To save energy, 10 minutes after the end
of the program the
Start/Stop
sensor but-
ton will begin to flash slowly and the dis-
play will go out.
–
The tumble dryer switches off automati-
cally.
寿
Do not open the door before the end
of the program.
ĺ
Open the door.
ĺ
Remove the laundry.
寿
Check that all items have been
removed from the drum. If items are left
in the dryer, they could be damaged by
overdrying when the dryer is next used.
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off
automatically (energy saving).
ĺ
Turn the program selector to
.
ĺ
Clean the lint filters.
ĺ
Close the drum door.
ĺ
Empty the condensed water container.
Emptying the condensed water
container
Empty the condensed water container
after every drying program.
Empty container See
.
will light up in the display if the maximum
level of the condensed water container is
reached.
To turn the message off: Open and close
the door while the dryer is switched on.
ĺ
Remove the
condensed water
container.
ĺ
To prevent water running out, keep it in a
horizontal position when carrying it. Hold
it at the front and towards the back.
ĺ
Empty the
condensed water
container.
ĺ
Replace the con-
densed water
container in the
dryer.
寿
Do not drink condensed water. It can
cause health problems in people and ani-
mals.
You cannot change to another program
once a program has started (this prevents
unintentional alterations). If you move the
program selector,
Cannot be changed
will
light up in the display until you move the
program selector back to the original pro-
gram.
Exception: The dryer is switched off by
turning the program selector to the
posi-
tion.
You will need to cancel the current program
before you can select a new one.
Canceling a program
ĺ
Touch the
Start/Stop
sensor button.
Cancel program
will light up in the display.
ĺ
Confirm with the
OK
sensor button.
As soon as
Program canceled
lights up:
ĺ
Turn the program selector to
.
The current program can also be
canceled in this way
ĺ
Turn the program selector to
.
ĺ
Select a program.
ĺ
Touch the
Start/Stop
sensor button.
The drying cycle begins.
Adding or removing laundry
寿
Bear in mind that hot steam can
escape after the door is opened.
ĺ
Pull open the door.
ĺ
Add or remove items.
ĺ
Close the door.
ĺ
Touch the
Start/Stop
sensor button.
The program starts.
Program duration
Altering the program sequence can cause
the program duration shown in the time dis-
play to be adjusted.
4. Selecting program settings
Programs with drying levels
Normal, Wrinkle-free, Delicates, Smoothing, Dress Shirts,
Express, Denim, Outdoor, Sportswear, Table Linen/
Drapes, Bed linen
The pre-set drying level can be changed if required.
ĺ
Touch the
or
sensor buttons to change the dry-
ing level.
Time-controlled and other programs
Time Dry, Cold Air, Basket
You can change the duration in ten-minute increments.
ĺ
Touch the
or
sensor buttons to change the dura-
tion.
Woollens/Silks, Proofing
The drying result is preset by the dryer and cannot be
altered.
Selecting an extra option
ĺ
Touch the sensor button for the extra you
want. It then lights up brightly.
Freshen up
For removing or reducing odors in clean
(dry or damp) clothing.
Gentle
Low temperature for delicate fabrics with
the
symbol on the care label, e.g. acrylic
garments.
Anti-crease
Helps to prevent creasing if the laundry is
not removed immediately after the end of a
program.
Buzzer
A buzzer sounds to let you know the pro-
gram has finished.
寿
Before using the tumble dryer for
the first time, ensure that it is correctly
installed and connected.
If the tumble dryer has not been trans-
ported as described in "Installation and
connection" then it must be left to stand
for at least 1 hour before it is connected
to the electricity supply. Otherwise the
heat pump can be damaged.
It is
essential
to read the operating instruc-
tions.
