Miele TWB 140 WP Operating Instructions Manual Download Page 34

Page: 34 / 80

Changing the programme sequence

Changing a programme after it
has started

It is no longer possible to change the
selected programme. This prevents the
appliance being operated
unintentionally, e.g. by children.

If you adjust the programme selector,
the



symbol will light up in the time

display. The



symbol goes out when

you select the original programme.

Cancelling the current programme



Turn the programme selector to the



position.

The programme is cancelled.

You can now select a new programme.

Adding or removing laundry

You have forgotten an item of laundry,
but the programme has already started.



Touch the

Start/Add laundry

sensor.

The word

Add

will appear in the time

display. The

Start/Add laundry

sensor

flashes slowly.



Risk of burning when touching

hot laundry in the drum.
You could burn yourself.



Open the door.



Add or remove laundry.

You can also change the programme
selection.



Close the door.



Touch the

Start/Add laundry

sensor.

The programme will continue.

Exceptions to adding laundry

In some cases, e.g. during the cooling
phase or in the

Proofing

programme,

you cannot add laundry.

In these cases, the word

Add

is not

displayed.

In exceptional cases, the door can be
opened while the programme is
running.

Summary of Contents for TWB 140 WP

















































































Search results

Summary of Contents for TWB 140 WP

Reviews:

Related manuals for TWB 140 WP

Brands by name

Popular brands

Miele TWB 140 WP, Operating Instructions Manual

Search results

Summary of Contents for TWB 140 WP

Reviews:

Related manuals for TWB 140 WP

Brands by name

Popular brands