Miele TKR 350 WP Operating Instructions Manual Download Page 43

Page: 43 / 84

Changing the programme sequence

You cannot change to another pro‐

gramme once a programme has started

(this prevents unintentional alterations).
If you move the programme selector,

Programme cannot be changed

will

light up in the display until you move

the programme selector back to the

original programme.
You will need to cancel the current pro‐

gramme before you can select a new

one.

Once a programme has star‐

ted ...

... cancelling the programme and

then selecting a new programme



Press the

Start/Stop

button.



Confirm

Cancel programme

with the

sensor.

–

Cooling down

will light up in the dis‐

play, depending on the drying dura‐

tion and the drying temperature

reached.

– Wait until

Finish

lights up in the dis‐

play or press the

Start/Stop

button

again until

Finish

lights up.



Press the



button to switch the dry‐

er off.



Press the



button to switch the dry‐

er on.



Select and start a new programme

straight away.

... saving the programme as a favour‐

ite



Press the

Start/Stop

button.



Select and confirm

Save programme

You can save this programme under

Fa‐

vourites

. See "Favourites, 2. Entering a

name".

Adding or removing laundry af‐

ter a programme has started



Press the

Start/Stop

button.



Select

Cancel programme



Confirm by touching the

sensor.

–

Cooling down

will light up in the dis‐

play, depending on the drying dura‐

tion and the drying temperature

reached.

– Wait until

Finish

lights up in the dis‐

play or press the

Start/Stop

button

again until

Finish

lights up.



Danger of burning.

Do not touch the back of the drum

when adding or removing items. The

drum and the items can be very hot.



Add or remove items.



Close the door.

To continue with the programme:
(change the drying level first of all, if

necessary)



Press the

Start/Stop.

button.

Programme duration

Altering the programme sequence can

cause the programme duration shown

in the display to be adjusted.

Summary of Contents for TKR 350 WP





















































































Search results

Summary of Contents for TKR 350 WP

Reviews:

Related manuals for TKR 350 WP

Brands by name

Popular brands

Miele TKR 350 WP, Operating Instructions Manual

Search results

Summary of Contents for TKR 350 WP

Reviews:

Related manuals for TKR 350 WP

Brands by name

Popular brands