background image

Fragrance flacon

53

FragranceDos

Fragrance flacons (optional accessor-
ies) can be used to give your laundry a
pleasant scent.

This dryer has 2 places for inserting
fragrance flacons. This gives you a
choice of how to use them.

- You can use both positions if you

wish to change from one scent to an-
other. You can close the fragrance
flacon that you are not using.

- Use both positions if you want a more

intense scent of the same fragrance.
Or if you wish to conveniently switch
between a scent for normal laundry
and DryFresh to freshen up your laun-
dry.

- Use one socket only if you only want

to use the one fragrance.

Risk of fire and damage to health

if fragrance flacons are used incor-
rectly.
The leaked fragrance can damage
your health if it comes into contact
with your body. Leaked fragrance
can cause fire.
Before using a fragrance flacon,
please read “Warnings and safety
notes”, “Using the fragrance flacon
(optional accessory)”.

Removing the protective seal
from the fragrance flacon

Only hold the fragrance flacon as il-
lustrated. Do not hold it at an angle
or tip it, as the fragrance will leak out
of it.

Take the fragrance flacon out of its
packaging.

Do not attempt to open the fragrance
flacon.

Hold the fragrance flacon securely so
that you do not open it by mistake.

Pull off the protective seal.

Summary of Contents for TEL 785 WP





































































































Reviews: